I found these two items on eBay, they are worth the money.
Roller Bearing Assist for Indexer
There is no installation. It slides right into place.
The roller assembly completely changes the press! Unbelievable!
KMS² UFO LM Reloading Press Light for Lee Loadmaster
I had bought one of the "center of the turret" lights, but I did not see it as the end of the visibility issue; plus, I'm too lazy to drill the center out on all my turrets. So when I saw the LED light ring, I was all in. It took about 5 minutes to install. The image is from my seated position operating the press. I don't need another die position for a powder cop type of die.
Two nice features added to my Load-Master
- Ranch Dog
- Site Admin
- Posts: 6456
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1616 times
- Been thanked: 2850 times
- GasGuzzler
- Moderator & Supporter
- Posts: 2034
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 329 times
- Been thanked: 500 times
Re: Two nice features added to my Load-Master
May just be the first time I have seen you tout an aftermarket part for a Lee press. Have I been asleep?
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.
- farmerjim
- Supporter
- Posts: 315
- Joined: 29 Jan 2015 14:27
- My Press Choice: Turret
- Location: Saint Francisville LA
- Has thanked: 20 times
- Been thanked: 114 times
Re: Two nice features added to my Load-Master
I just bought both of them. Thanks for the post. I have put my Load Master in the closet because of the indexer, Hopefully this will bring it back to life.
- Ranch Dog
- Site Admin
- Posts: 6456
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1616 times
- Been thanked: 2850 times
Re: Two nice features added to my Load-Master
Early on, I bought some mods but got to the point where I decided to start over and take it back to the way Lee made it and figure it out. That has been a while. I started on the Load-Master in '99.GasGuzzler wrote:May just be the first time I have seen you tout an aftermarket part for a Lee press. Have I been asleep?
I need to generate some cases for all my presses; that has become the tough part for me now.
Michael
- Tom Myers
- Posts: 28
- Joined: 30 Oct 2018 15:04
- My Press Choice: Progressive
- Location: Nimrod, Minnesota
- Has thanked: 1 time
- Been thanked: 21 times
Re: Two nice features added to my Load-Master
Wow!!
I just received the Roller Bearing Assist mod and snapped it onto the Loadmaster.
It literally made the old workhorse into a new machine. The rotation advance is totally effortless and smooth now.
I just received the Roller Bearing Assist mod and snapped it onto the Loadmaster.
It literally made the old workhorse into a new machine. The rotation advance is totally effortless and smooth now.
- Royce
- Posts: 109
- Joined: 12 Apr 2020 11:35
- My Press Choice: Turret
- Location: Tulsa OK
- Has thanked: 14 times
- Been thanked: 23 times
Re: Two nice features added to my Load-Master
I just bought one of those lights for my Lee Turret press. Very nice, thanks!
2 X Lee Classic Turret Presses, 3 X Lee 1000 Presses, 1 X Lee Reloader Press, 1X Lee Six Pack Pro, 1X Ultimate Turret
- Royce
- Posts: 109
- Joined: 12 Apr 2020 11:35
- My Press Choice: Turret
- Location: Tulsa OK
- Has thanked: 14 times
- Been thanked: 23 times
Re: Two nice features added to my Load-Master
Today the light was installed. Big improvement, now I can see the powder in each cartridge.
You do not have the required permissions to view the files attached to this post.
2 X Lee Classic Turret Presses, 3 X Lee 1000 Presses, 1 X Lee Reloader Press, 1X Lee Six Pack Pro, 1X Ultimate Turret