Lee Classic Powder Measure

Large rifle case volumetric powder charging using the time tested Perfect Powder Measure and the new Classic Powder Measure.
User avatar
daboone
Founding Member
Founding Member
Posts: 1397
Joined: 30 Nov 2013 21:47
My Press Choice: Single Stage
Location: AZ, TX, HI
Has thanked: 677 times
Been thanked: 787 times

Re: Lee Classic Powder Measure

Post by daboone »

I use my old RCBS 505. It it zeroed and checked with a Lyman set of check weight just prior to the testing.
An ignorant person is one who doesn't know what you have just found out.

When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
User avatar
daboone
Founding Member
Founding Member
Posts: 1397
Joined: 30 Nov 2013 21:47
My Press Choice: Single Stage
Location: AZ, TX, HI
Has thanked: 677 times
Been thanked: 787 times

Re: Lee Classic Powder Measure

Post by daboone »

Here are the results for HS-6 and Trail Boss powders using the Lee Classic Powder Measure.

With HS-6 the results were the same as Bullseye with a .01g difference in only 2 out of the 10 drops. I did no further testing HS-6.


Trail Boss Data:
Measure adjusted for 14.6g with approximately 2 second fill time. Individual weights as listed for each dispensing.
1- 14.6g
2- 14.4g
3- 14.6g
4- 14.6g
5- 14.5g
6- 14.4g
7- 14.6g
8- 14.8g
9- 14.6g
10- 14.5g

Then 5 drops of the Trail Boss 14.6g were performed with approximately 2 second fill times and measure in bulk for a total of 73.3g or a 14.66gg average.

Measure adjusted for 4.5g with approximately 2 second fill time. Individual weights as listed for each dispensing.
1- 4.5g
2- 4.4g
3- 4.3g
4- 4.4g
5- 4.4g
6- 4.4g
7- 4.4g
8- 4.2g
9- 4.3g
10- 4.4g
An ignorant person is one who doesn't know what you have just found out.

When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
trashysquid
Posts: 16
Joined: 26 Apr 2015 11:16
My Press Choice: Turret
Location: TX
Been thanked: 5 times

Re: Lee Classic Powder Measure

Post by trashysquid »

I think this a big improvement to Lee's powder management line-up. I tried using the other Lee powder management tools before this one, and I wasn't too happy with them. I now have one of these on my bench, and it shares powder management duties with my Uniflow....a very good product.
User avatar
Patriot007
Posts: 119
Joined: 29 Dec 2014 22:44
My Press Choice: Progressive
Location: Valdosta, Ga
Has thanked: 203 times
Been thanked: 54 times

Re: Lee Classic Powder Measure

Post by Patriot007 »

daboone wrote:Here are the results for HS-6 and Trail Boss powders using the Lee Classic Powder Measure.

With HS-6 the results were the same as Bullseye with a .01g difference in only 2 out of the 10 drops. I did no further testing HS-6.


Trail Boss Data:
Measure adjusted for 14.6g with approximately 2 second fill time. Individual weights as listed for each dispensing.
1- 14.6g
2- 14.4g
3- 14.6g
4- 14.6g
5- 14.5g
6- 14.4g
7- 14.6g
8- 14.8g
9- 14.6g
10- 14.5g

Then 5 drops of the Trail Boss 14.6g were performed with approximately 2 second fill times and measure in bulk for a total of 73.3g or a 14.66gg average.

Measure adjusted for 4.5g with approximately 2 second fill time. Individual weights as listed for each dispensing.
1- 4.5g
2- 4.4g
3- 4.3g
4- 4.4g
5- 4.4g
6- 4.4g
7- 4.4g
8- 4.2g
9- 4.3g
10- 4.4g
Thanks daboone for taking the time to post this info. I was hoping I would have time today to play with mine, but the wife had other plans for me. She knows I'm up to some thing and,, well you know. I'll let you know how it goes when I finally get a chance to set it up. Thanks Man. :(
Post Reply

Return to “Bench/Stand Mounted Powder Measures”