Doing some casting and powder coating

Lee Liquid Alox and all other lubes applications.
Post Reply
User avatar
reloader762
Posts: 123
Joined: 03 Jul 2016 10:42
My Press Choice: Turret
Location: NC
Has thanked: 42 times
Been thanked: 80 times

Doing some casting and powder coating

Post by reloader762 »

Well it's either been dark when I get home from work or the weather sucks when I'm off, so I've been casting a few bullets some new some old and doing some powder coating for when I can get out and do some shooting. Here are some of what I've been doing.

NOE 359 / 155 gr. clone of the Lyman /Ray Thompson 358156 HP I'm going to use the Carolina Blue for 357 Mag. loads and the Yellow Green for 38+P loads.
Image


NOE 452 / 220 gr. Cup Points the mold also cast HP's as well as FN bullets, I did these in OD Green and Yellow Green for the Hi Point Carbine
Image

Accurate 215 gr. .314" FN bullet I had cut for my deep throated 91/30 I coated these with Smokes Clear Gloss PC.
Image

Lee 185 gr. RN for my Mosin and SKS rifles. L to R Smokes Clear Gloss, Eastwood Med. Green. Smokes Carolina Blue and Eastwood Maroon Red for my Mosin and SKS rifles.
Image

NOE 9mm 124 gr. TC coated with Smokes Yellow Green and Clear Gloss for my CANIK TP9SA
Image
Image
The Reloaders Network discord Channel
https://discord.gg/Nafuzht
User avatar
farmerjim
Supporter
Supporter
Posts: 315
Joined: 29 Jan 2015 14:27
My Press Choice: Turret
Location: Saint Francisville LA
Has thanked: 20 times
Been thanked: 114 times

Re: Doing some casting and powder coating

Post by farmerjim »

You have been busy. They look good.
User avatar
reloader762
Posts: 123
Joined: 03 Jul 2016 10:42
My Press Choice: Turret
Location: NC
Has thanked: 42 times
Been thanked: 80 times

Re: Doing some casting and powder coating

Post by reloader762 »

farmerjim wrote:You have been busy. They look good.
Thanks, not much else to do this time of year, yard work is pretty much done with till next spring, to cold to fish so I get out in the building and do some casting,coating and reloading for when the weather is good enough to do some shooting.
The Reloaders Network discord Channel
https://discord.gg/Nafuzht
User avatar
JohnnyEnfield
Supporter
Supporter
Posts: 159
Joined: 08 Dec 2017 20:24
My Press Choice: Single Stage
Location: Northeast USA
Has thanked: 176 times
Been thanked: 53 times

Re: Doing some casting and powder coating

Post by JohnnyEnfield »

Those are beautiful bullets. Thanks for sharing them with us. Gives me hope that I can cast nice bullets someday.
Reduce, reuse, recycle, means- resize, reload, recycle.
User avatar
Ranch Dog
Site Admin
Site Admin
Posts: 6456
Joined: 22 Jun 2013 17:16
My Press Choice: Progressive
Location: Inez, TX
Has thanked: 1616 times
Been thanked: 2850 times

Re: Doing some casting and powder coating

Post by Ranch Dog »

Yeap, so very pretty bullets!
Michael
Image
Post Reply

Return to “Bullet Lube and Powder Coating”