Lee Auto disc and Titegroup

Discussions covering the components and techniques of reloading for your handgun.
Post Reply
nsdread07
Posts: 8
Joined: 07 Jul 2016 09:55
My Press Choice: Turret
Location: maine
Has thanked: 1 time
Been thanked: 1 time

Lee Auto disc and Titegroup

Post by nsdread07 »

I was looking up a load for 380 using titegroup and found one in the Lyman 49th. It lists 2.4 grains under a 90 grain bullet. My auto disc only goes down to 3.5 grains using the smallest disc. I can use the dipper fore 2.2 grains. I wonder if the Auto drum PM would be a good choice for this small a load?
62chevy
Founding Member
Founding Member
Posts: 1617
Joined: 17 Oct 2013 18:09
My Press Choice: Turret
Location: West Virginia
Has thanked: 1017 times
Been thanked: 323 times

Re: Lee Auto disc and Titegroup

Post by 62chevy »

I use the Lee Adjustable Charge Bar that I modified for use with less than 5 grains. I have also used the Titan Micro Charge. http://www.titanreloading.com/powder-ha ... cro-charge

As for the autodrum I have no clue, sorry.
Je suis Charlie
Rmelchiori
Posts: 25
Joined: 16 Nov 2014 15:58
My Press Choice: Progressive
Location: Chicago suburbs
Has thanked: 2 times
Been thanked: 9 times

Re: Lee Auto disc and Titegroup

Post by Rmelchiori »

I use the Auto Drum for both 380 and 9mm with Titegroup. It throws if very consistently. In fact, I'm probably going to get another one so that I can dedicate one to each caliber and not have to adjust them when I change between the cailbers on my Loadmaster.
Post Reply

Return to “Handgun Reloading”