As stated before I only shoot lead bullets.
I am starting to work with a Mauser Mod 95 with a light barrel.
I am getting a lot of horizonal stringing and trying to find out some info on it I googled it.
The answers are all over the place.
What I have!
Mod 95 Mauser.
New 7MM Mauser barrel 1-9 twist.
Wood stock ( My manufacture ) made from well seasoned maple.
Action glass bedded.
Both action screws torqued to 30 inch pounds
Barrel free floated tip to action using 3x5 card folded in half.
Load is 20 grains of IMR SR4759.
Bullet is a 150 grain bore rider hunter from a NOE mold.
Lead has a BHN of 15-17
At 100 yards I am holding about 2 inch and at 200 get a lot of horizonal stringing, almost a perfect straight line.
Kinda got me stumped.
Need help!!
beekeeper
Horizonal stringing
- akuser47
- Moderator & Supporter
- Posts: 1397
- Joined: 30 Jun 2013 09:16
- My Press Choice: Single Stage
- Location: ohio
- Has thanked: 666 times
- Been thanked: 266 times
Re: Horizonal stringing
I have to ask what trigger weight ? What trigger you useing. Sounds like you have all the good stuff. Also how is you barrel crown? Just a few things I have ran into. Also have you done a chamber cast to measure the needed C.O.L. necessary to Aid in accuracy?
- mr surveyor
- Founding Member
- Posts: 649
- Joined: 30 Jun 2013 09:30
- My Press Choice: Hand Press
- Location: NE Texas
- Has thanked: 385 times
- Been thanked: 231 times
Re: Horizonal stringing
I know it defeats the purpose of the free floating barrel, but for grins and giggles I would be tempted to experiment with cardboard wedgies on each side of the barrel, starting about midway along the forestock. Redneck barrel harmonics evaluation
jd
jd
--------------------------------------------------------------------------------------
There's just some things best left unsaid on the internetsuperhighway.
There's just some things best left unsaid on the internetsuperhighway.