Old Lee item Automatic Primer Pocket Cleaner

Early, hard to find items for the Lee Enthusiast!

Old Lee item Automatic Primer Pocket Cleaner

Postby cj8281 » 06 Feb 2018 00

I recently bought a few Lee Loaders off of KSL and the guy threw in a few extras, one of which is the Lee Automatic Primer Pocket Cleaner. The other item from Lee Custom Engineering was the 30 cal Decapper and base for G.I. Brass. The newer item that he included is from Lee Precision, the Lee Bullet Lubrication & Resizing Kit. It even still has the 2 ounces of Hodgdon's Alox bullet lube. The sizer is 357 (left side) and works with a hammer. The cookie cutter is on the right side. Kind of wish it were for the 358 size.
old things.JPG
You do not have the required permissions to view the files attached to this post.
cj8281
 
Posts: 197
Joined: 03 Jan 2017
Has thanked: 44 times
Been thanked: 70 times
My Press Choice: Turret
Location: Utah

Re: Old Lee item Automatic Primer Pocket Cleaner

Postby Ranch Dog » 06 Feb 2018 06

Nice find! The aluminum cookie cutter should be easy to lap out to your desired diameter. Coat some bullet with lapping compound rather than lube and start pushing them through. You might need to start with .357" bullets.
Michael
Image
User avatar
Ranch Dog
Site Admin
Site Admin
 
Posts: 4459
Joined: 22 Jun 2013
Has thanked: 869 times
Been thanked: 1901 times
My Press Choice: Turret
Location: Cuero, TX

Re: Old Lee item Automatic Primer Pocket Cleaner

Postby Old Scribe » 09 Feb 2018 14

Neat find!
"Well here's another nice mess you've gotten me into." Oliver Hardy
User avatar
Old Scribe
Supporter
Supporter
 
Posts: 266
Joined: 02 May 2015
Has thanked: 320 times
Been thanked: 71 times
My Press Choice: Turret
Location: State of Jefferson

Re: Old Lee item Automatic Primer Pocket Cleaner

Postby mikld » 09 Jul 2018 11

Cool! I got my start lubing/sizing cast bullets with a kit like the one pictured. Mine had a red wax lube and I used it for several months before I made my own cookie cutters and used a Lee sizing die kit. I vaguely remember the "automatic" primer pocket cleaner. It worked on the same principle as a Yankee Screwdriver, an innovative design. I wonder if it would be accepted today with all the new reloaders? ;)
mikld
Supporter
Supporter
 
Posts: 302
Joined: 30 Jun 2013
Has thanked: 55 times
Been thanked: 154 times
My Press Choice: Turret
Location: S. Oregun

Re: Old Lee item Automatic Primer Pocket Cleaner

Postby Ranch Dog » 09 Jul 2018 13

So, how does the primer pocket cleaner work?
Michael
Image
User avatar
Ranch Dog
Site Admin
Site Admin
 
Posts: 4459
Joined: 22 Jun 2013
Has thanked: 869 times
Been thanked: 1901 times
My Press Choice: Turret
Location: Cuero, TX

Re: Old Lee item Automatic Primer Pocket Cleaner

Postby Fyodor » 10 Jul 2018 23

The cleaning brush is mounted on a "twisted" rod, with the bell having a square hole. When the bell is pushed upwards, the brush turns.
"I disapprove of what you say, but I will defend to the death your right to say it"
- Evely Beatrice Hall, often misattributed to Voltaire

I think I'm thinking, therefore I may possibly be.
User avatar
Fyodor
Founding Member & Supporter
Founding Member & Supporter
 
Posts: 1276
Joined: 04 Jan 2014
Has thanked: 758 times
Been thanked: 416 times
My Press Choice: Progressive
Location: Gernsbach, Germany

Re: Old Lee item Automatic Primer Pocket Cleaner

Postby Ranch Dog » 11 Jul 2018 10

Good idea, but I guess not in that it did not survive.
Michael
Image
User avatar
Ranch Dog
Site Admin
Site Admin
 
Posts: 4459
Joined: 22 Jun 2013
Has thanked: 869 times
Been thanked: 1901 times
My Press Choice: Turret
Location: Cuero, TX


Return to Lee Custom Engineering & Lee Precision Memorabilia

Who is online

Users browsing this forum: No registered users and 1 guest

  • Advertisement