On the pro1000 there is not place to put a powder cop die or similar. So I have a peek into every single case before I place the bullet. On slim, long cases like the .38spl it can be difficult to actually see the powder, especially when they still are stained from previous black powder shooting.
Some time ago I bought a few of these little LED lamps that attach directly to a 9V block battery. It is single button operation, but can be set to three different brithness levels.
I got some aluminium bar, that I fitted to the top of the press, using one of the pillar screws. The edges are trimmed to allow for the turret and to fit the silhuette of the top flange of the press. I used two plumbing pliers to bend the bar, that's why it's not angeled perfectly... but this doesn't hurt functionality.
The lamp is attached to the mount by a strip of self adhesive velcro, so it can be taken off for battery swap or replacement when broken (I bought a set of 8 lamps for I think it was 12$ including shipping)
Case on shellplate without lighting:
Case on shellplate with lighting (no powder, just for demonstration). The lamp is set to brigthness level one (of three), which already is wuite brigth on that close distance:
pro1000 visual powder check
- Fyodor
- Founding Member & Supporter
- Posts: 1514
- Joined: 04 Jan 2014 05:45
- My Press Choice: Progressive
- Location: Gernsbach, Germany
- Has thanked: 794 times
- Been thanked: 504 times
pro1000 visual powder check
You do not have the required permissions to view the files attached to this post.
"I disapprove of what you say, but I will defend to the death your right to say it"
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
- Fyodor
- Founding Member & Supporter
- Posts: 1514
- Joined: 04 Jan 2014 05:45
- My Press Choice: Progressive
- Location: Gernsbach, Germany
- Has thanked: 794 times
- Been thanked: 504 times
Re: pro1000 visual powder check
Available from walmarts in a pack of three, including batteries for 18$
http://www.walmart.com/ip/39096884?wmls ... 91&veh=sem
http://www.walmart.com/ip/39096884?wmls ... 91&veh=sem
"I disapprove of what you say, but I will defend to the death your right to say it"
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: pro1000 visual powder check
I meant to buy these lights when you posted this information. I had a tough time trying to check out on Wal-Mart. They didn't like my shipping addresses, either of them and wanted to charge me $36 for shipping this $18 item. I've had this problem with Wal-Mart when they are not the retailer.
Anyway, I found them on eBay, same seller and no problems with the shipping.
Anyway, I found them on eBay, same seller and no problems with the shipping.
Michael
- Fyodor
- Founding Member & Supporter
- Posts: 1514
- Joined: 04 Jan 2014 05:45
- My Press Choice: Progressive
- Location: Gernsbach, Germany
- Has thanked: 794 times
- Been thanked: 504 times
Re: pro1000 visual powder check
Just don't run them on highest level for a while. They get so hot, the plastic melts... But level 1 already is quite bright.
"I disapprove of what you say, but I will defend to the death your right to say it"
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.