Hello from N/E Ohio
- bobgn1
- Posts: 8
- Joined: 16 Mar 2016 19:48
- My Press Choice: Turret
- Location: N/E Ohio
- Has thanked: 13 times
- Been thanked: 7 times
Hello from N/E Ohio
I'm a newbie to reloading and purchased a Lee Classic Turret Kit a few weeks back and have loaded about 100 38 special already. I really like the turret press and especially the Lee loading manual book that was included in the kit. I also have the Lyman and Speer manuals but I think the Lee has more information.
I had a problem loading a small load of Titegroup 3.2gr in my 38's as the smallest hole in the Auto Disc is .30. But searching this forum I found some info regarding Custom Cast's "Mini Disk" kit that comes with a .27 aperture that should enable me to drop a 3.2gr load. I ordered it from Custom Cast and will report back when I try the "Mini Disk".
I had a problem loading a small load of Titegroup 3.2gr in my 38's as the smallest hole in the Auto Disc is .30. But searching this forum I found some info regarding Custom Cast's "Mini Disk" kit that comes with a .27 aperture that should enable me to drop a 3.2gr load. I ordered it from Custom Cast and will report back when I try the "Mini Disk".
- daboone
- Founding Member
- Posts: 1397
- Joined: 30 Nov 2013 21:47
- My Press Choice: Single Stage
- Location: AZ, TX, HI
- Has thanked: 677 times
- Been thanked: 787 times
Re: Hello from N/E Ohio
Welcome to THE Lee friendly site1bobgn1 wrote: I had a problem loading ........
You'll find many "problems" as you get sucked further into this fascinating addictive world. The best part is the feeling of accomplishment when solve the problems. Sometimes you will think out of the box and find solutions that hopefully you'll post/share here.
Once I filled a hole in a disk with epoxy putty and drilled out a new hole to obtain the desired powder weight. A little later when I started using another powder that disk modification wasn't necessary but I still feel proud of my work-a-round. I've also seen pictures of drilled and tapped disk using a screw to adjust the volume of the hole.
An ignorant person is one who doesn't know what you have just found out.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
- bobgn1
- Posts: 8
- Joined: 16 Mar 2016 19:48
- My Press Choice: Turret
- Location: N/E Ohio
- Has thanked: 13 times
- Been thanked: 7 times
Re: Hello from N/E Ohio
Yeah, I put a piece of shrink tube in the .30 fit perfect and then was throwing below 3.2gr, so saw the "Mini Disk" and thought I'd give it a shot, keep you posted.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Hello from N/E Ohio
Welcome to the forum, it looks like you are off to a good start!
Custom Cast also offers the blank disks with the pilot holes for custom sizing. They provide a chart table that converts drill size/# to cc.
Custom Cast also offers the blank disks with the pilot holes for custom sizing. They provide a chart table that converts drill size/# to cc.
Michael
- 357cyrus
- Founding Member
- Posts: 370
- Joined: 30 Jun 2013 09:16
- My Press Choice: Turret
- Location: North Central Ohio
- Has thanked: 90 times
- Been thanked: 140 times
Re: Hello from N/E Ohio
Hello and welcome from another North Eastern Ohioan. We've got at least a handful of buckeyes here. Sooner or later we ought to have a meet up. I'm originally from the Youngstown area, but currently live near Ashland. Where are you at?
*** Peace Through Superior Firepower ***
- Fyodor
- Founding Member & Supporter
- Posts: 1514
- Joined: 04 Jan 2014 05:45
- My Press Choice: Progressive
- Location: Gernsbach, Germany
- Has thanked: 794 times
- Been thanked: 504 times
Re: Hello from N/E Ohio
Herzlich willkommen from Germany!
Custom cast also offers blank disks to drill your own cavities. Have you also ordered these?
Custom cast also offers blank disks to drill your own cavities. Have you also ordered these?
"I disapprove of what you say, but I will defend to the death your right to say it"
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
Re: Hello from N/E Ohio
West Virginia saying Hey !!! Nice thinking out side the box with the shrink tube. Modifying disk holes seams to be a popular past time around here.
Je suis Charlie