30.06 reload
-
- Posts: 3
- Joined: 10 Nov 2016 01:30
- My Press Choice: Single Stage
- Location: Ut
30.06 reload
I have come across some old winchester .308 projectiles, and I was thinking of loading them for my 30.06 does someone have a load spec for 30.06 with a 190g round nose silver tip. I have plenty of data for a 190g hpbt but I am sure it is different for the rn.
- farmerjim
- Supporter
- Posts: 315
- Joined: 29 Jan 2015 14:27
- My Press Choice: Turret
- Location: Saint Francisville LA
- Has thanked: 20 times
- Been thanked: 114 times
Re: 30.06 reload
Modern Reloading 2nd Edition by Richard Lee has a 190 gr jacketed listed, but it is a bit much to post the whole table. What powder are you using ? You can use the data for the HPBT, just start low and work up.
-
- Founding Member & Supporter
- Posts: 1099
- Joined: 21 Jan 2014 20:57
- My Press Choice: Progressive
- Location: Eastern Iowa
- Has thanked: 182 times
- Been thanked: 357 times
Re: 30.06 reload
Sorry Cdenner I don't have a load for you. But talk lately about 30-06 gave me the bug. I'm taking mine out today and shoot it!
- daboone
- Founding Member
- Posts: 1397
- Joined: 30 Nov 2013 21:47
- My Press Choice: Single Stage
- Location: AZ, TX, HI
- Has thanked: 677 times
- Been thanked: 787 times
Re: 30.06 reload
Welcome to LEE LOADER. I'm glad you found this great site.
What manual are you using that doesn't have a ton of 30/06 data?
What manual are you using that doesn't have a ton of 30/06 data?
An ignorant person is one who doesn't know what you have just found out.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
-
- Posts: 3
- Joined: 10 Nov 2016 01:30
- My Press Choice: Single Stage
- Location: Ut
Re: 30.06 reload
I am using lee'so 2nd edition but I have only been loading for about a year. I haven't really experimented very much. I am using IMR 4064 powder I was wondering mostly for head spacing and oal.
-
- Supporter
- Posts: 888
- Joined: 06 Mar 2016 16:09
- My Press Choice: Hand Press
- Location: SW Ohio
- Has thanked: 156 times
- Been thanked: 240 times
Re: 30.06 reload
What are you shooting them in?
Unless you've got a out of spec chamber or FL die head space shouldn't be a concern and you can always pick up a case gauge and check your cases and finished rounds. I have all three of Lyman's gauges and find them quite handy as I load for a variety of action type.
Make smoke,
Unless you've got a out of spec chamber or FL die head space shouldn't be a concern and you can always pick up a case gauge and check your cases and finished rounds. I have all three of Lyman's gauges and find them quite handy as I load for a variety of action type.
Make smoke,
Curt.......makin' smoke and raising my carbon foot print one cartridge at a time
-
- Posts: 3
- Joined: 10 Nov 2016 01:30
- My Press Choice: Single Stage
- Location: Ut