Whew!
-
- Founding Member & Supporter
- Posts: 674
- Joined: 30 Jun 2013 09:30
- My Press Choice: Turret
- Location: S. Oregun
- Has thanked: 203 times
- Been thanked: 371 times
Whew!
I just came in from the shop after a failed attempt to cast some bullets. I played around for about 2 hours. I have a 2 cavity 160 gr. Lachmiller SWC mold that makes excellent bullets, when I can make it work. My recipe today was; Lyman #2 (10 lbs of 'certified #2, and 8-10 lbs of "my" #2) and I heated the mold fairly hot on my hotplate. Started melt out at around 750 degrees, cast a few, let some cool and measured them. About .005" out of round, or .357"-.362"+. Too much for me. Cooled melt to 650 degrees. Let melt "settle" and cast a few more. Same variations. Roughly .005" and a hair out of round. I tried varying the distance to the spout, tried "pressure pouring", nope same stuff. I know this mold can make consistent .358" bullets when I remember what the mold likes, but today I couldn't find the right combination (mebbe I need to change my stool?, or play some Willie instead of Do-%@*&$?). So, I pulled the plugs, cleaned up dropped sprues and let the pot cool and went inside to play on my computer...
Try again mebbe Monday...
Try again mebbe Monday...
Last edited by mikld on 23 Jun 2018 15:10, edited 1 time in total.
- daboone
- Founding Member
- Posts: 1397
- Joined: 30 Nov 2013 21:47
- My Press Choice: Single Stage
- Location: AZ, TX, HI
- Has thanked: 677 times
- Been thanked: 787 times
Re: Whew!
Personally I'm convinced the moon phase, black cats and or a problem in Afghanistan can influence casting outcomes.
An ignorant person is one who doesn't know what you have just found out.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Whew!
You are right about that. If I can't cast usable bullets within 15 minutes of starting, I pack it up for the day. It always seems if it doesn't come together at the start, it isn't. I don't have very many misses, but they do happen, so I stop.daboone wrote:Personally I'm convinced the moon phase, black cats and or a problem in Afghanistan can influence casting outcomes.
Michael
- GasGuzzler
- Moderator & Supporter
- Posts: 2045
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 330 times
- Been thanked: 501 times
Re: Whew!
My pot doesn't get hot in 15 minutes. I don't know the temp any more because I packed my PIDs away. I can make better bullets without knowing the temp. Takes me an hour to feel right then I'm tired. Casting hurts my back. I use the same lead and same pot for all my bullets but each mold is very different on what they "like" as far as pour rate and distance off the spout. I guess I need to take notes.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.
- RBHarter
- Founding Member
- Posts: 2047
- Joined: 13 Mar 2014 19:45
- My Press Choice: Single Stage
- Location: The green hell 90 miles north of Texarka
- Has thanked: 76 times
- Been thanked: 672 times
Re: Whew!
Boy I know about the fussy moulds .
I have one that needs a little more tin to run right and a sister mould that whiskers like cat with it's tail in a light socket if I run anything but straight WW . Oh and that brass mould !
I have an NOE that I just gave up on ever getting 5 keepers in a single pour . It'd do 3 every time , 4 about 10% .
I have one that needs a little more tin to run right and a sister mould that whiskers like cat with it's tail in a light socket if I run anything but straight WW . Oh and that brass mould !
I have an NOE that I just gave up on ever getting 5 keepers in a single pour . It'd do 3 every time , 4 about 10% .
Just a Red neck,White boy, Blue blood American.....
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Whew!
You bring up a good reason not to buy single or double cavity molds if you can help it. At least with a bad cavity, even if it is just something wrong with the current session, you can keep going.RBHarter wrote:I have an NOE that I just gave up on ever getting 5 keepers in a single pour . It'd do 3 every time , 4 about 10% .
Michael
- GasGuzzler
- Moderator & Supporter
- Posts: 2045
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 330 times
- Been thanked: 501 times
Re: Whew!
Good point. All mine are two hole except the 45 colt I recently bought from RD and my old Lee custom RD design for my waffle top.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.
-
- Supporter
- Posts: 888
- Joined: 06 Mar 2016 16:09
- My Press Choice: Hand Press
- Location: SW Ohio
- Has thanked: 156 times
- Been thanked: 240 times
Re: Whew!
I usually switch to another mold and try it, maybe more than one. Just hate getting the pot hot and nothing to show for it.
Make smoke,
Make smoke,
Curt.......makin' smoke and raising my carbon foot print one cartridge at a time
- daboone
- Founding Member
- Posts: 1397
- Joined: 30 Nov 2013 21:47
- My Press Choice: Single Stage
- Location: AZ, TX, HI
- Has thanked: 677 times
- Been thanked: 787 times
Re: Whew!
Waffle TopGasGuzzler wrote:Good point. All mine are two hole except the 45 colt I recently bought from RD and my old Lee custom RD design for my waffle top.
An ignorant person is one who doesn't know what you have just found out.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
-
- Supporter
- Posts: 258
- Joined: 15 May 2018 16:37
- My Press Choice: Single Stage
- Location: Oregon
- Has thanked: 94 times
- Been thanked: 74 times
Re: Whew!
Ohio3Wheels wrote:I usually switch to another mold and try it, maybe more than one. Just hate getting the pot hot and nothing to show for it.
Make smoke,