Small Safety Prime stopped working
-
- Founding Member
- Posts: 736
- Joined: 30 Jun 2013 09:30
- My Press Choice: Turret
- Location: Kingsland, GA
- Has thanked: 51 times
- Been thanked: 222 times
Small Safety Prime stopped working
HELP!!!
I can't figure what's happened. I was loading some .38 special on the Classic Turret and suddenly the Safety Prime stopped feeding primers. I emptied it out and thought some random bit of crud must have worked its way inside so I took it apart for cleaning and didn't see a thing wrong with it. There are no burrs anywhere to be seen and there just seems to be no reason they shouldn't be feeding. The primers fill the chute all the way to the bottom but won't go into the ... well... The Pez looking feeder part. I'm not sure what that part is really called. I've tried bumping it, shaking it, rattle the primers around, and it just stopped feeding. I'm at a loss.
I can't figure what's happened. I was loading some .38 special on the Classic Turret and suddenly the Safety Prime stopped feeding primers. I emptied it out and thought some random bit of crud must have worked its way inside so I took it apart for cleaning and didn't see a thing wrong with it. There are no burrs anywhere to be seen and there just seems to be no reason they shouldn't be feeding. The primers fill the chute all the way to the bottom but won't go into the ... well... The Pez looking feeder part. I'm not sure what that part is really called. I've tried bumping it, shaking it, rattle the primers around, and it just stopped feeding. I'm at a loss.
-
- Founding Member
- Posts: 736
- Joined: 30 Jun 2013 09:30
- My Press Choice: Turret
- Location: Kingsland, GA
- Has thanked: 51 times
- Been thanked: 222 times
Re: Small Safety Prime stopped working
Still DOA. I'm at a complete loss. I wasn't sure what Isopropyl would do to it but I took the risk using it as a solvent and scrubbed it some and nothing happened. Put it back together yet again and it still doesn't work.
Nothing seems to be broken and I still can't figure this out. Frustration level is at maximum sweat pumps are primed and anger monkeys are screaming on the backside....
Nothing seems to be broken and I still can't figure this out. Frustration level is at maximum sweat pumps are primed and anger monkeys are screaming on the backside....
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
-
- Founding Member
- Posts: 736
- Joined: 30 Jun 2013 09:30
- My Press Choice: Turret
- Location: Kingsland, GA
- Has thanked: 51 times
- Been thanked: 222 times
Re: Small Safety Prime stopped working
All this time later and I finally figured it out. There is a small spring that is just a piece of wire with two bends in it that is supposed to pull the top part back. As you work the Safety Prime there is a sliding shuttle that moves the primers from the chute forward away from the rest of them (hence the "Safety" Prime I guess) and then the shuttle is supposed to move back again ready for the next primer. The shuttle on mine was staying forward and not moving back thus blocking any more primers from feeding. One screw and the chute pulls away from the priming feeder body, and a second screw and the priming body actually falls apart in your hand leaving you a fun puzzle to now reverse engineer. It took a minute but once you figure out how it works it looks like the spring wire in mine is either worn out or maybe the plastic has worn just enough that it doesn't hold the precise shape needed to function. However, now knowing how it works it takes all of maybe half a second to with finger pressure just slide the top of the priming body back just a bit and it now works just fine. So even broken or worn it still works well enough if you just know how it works.
- wscywabbit
- Founding Member
- Posts: 53
- Joined: 04 Dec 2013 15:19
- My Press Choice: Turret
- Location: Washington State
- Has thanked: 13 times
- Been thanked: 16 times
Re: Small Safety Prime stopped working
Thanks for the breakdown on the mechanics and possible fix. .. Although if it's still having an issue I might call Lee and see about a replacement
In God and guns we trust; it's an American tradition!
- celem
- Posts: 49
- Joined: 17 Oct 2013 20:39
- My Press Choice: Hand Press
- Location: North Carolina, USA
- Has thanked: 2 times
- Been thanked: 44 times
Re: Small Safety Prime stopped working
After loading several thousand primers, mine also give up the ghost. I also took mine part and found the same "u" shaped delicate wire spring that you describe. Basically, the spring has sprung and no longer has the juice left in it to return the assembly to position. I tried to stretch it back out and it just broke. Fortunately, I buy such things with a backup so I took out the backup and I'm back in business. I guess Lee would replace it but I'm not sure that sending it would be worth the postage.Maximumbob54 wrote:All this time later and I finally figured it out. There is a small spring that is just a piece of wire with two bends in it that is supposed to pull the top part back. As you work the Safety Prime there is a sliding shuttle that moves the primers from the chute forward away from the rest of them (hence the "Safety" Prime I guess) and then the shuttle is supposed to move back again ready for the next primer. The shuttle on mine was staying forward and not moving back thus blocking any more primers from feeding. One screw and the chute pulls away from the priming feeder body, and a second screw and the priming body actually falls apart in your hand leaving you a fun puzzle to now reverse engineer. It took a minute but once you figure out how it works it looks like the spring wire in mine is either worn out or maybe the plastic has worn just enough that it doesn't hold the precise shape needed to function. However, now knowing how it works it takes all of maybe half a second to with finger pressure just slide the top of the priming body back just a bit and it now works just fine. So even broken or worn it still works well enough if you just know how it works.
By the way, I have ordered another Maintenance spare to keep on the shelf for the next time that this happens.
- celem
- Posts: 49
- Joined: 17 Oct 2013 20:39
- My Press Choice: Hand Press
- Location: North Carolina, USA
- Has thanked: 2 times
- Been thanked: 44 times
Re: Small Safety Prime stopped working
Knowing that lee has an excellent warranty service I sent an email to see if they would replace the spring. Lee just emailed me and said they are sending me the spring for free.
FYI - the part is:
BP3376 RETURN SPRING
FYI - the part is:
BP3376 RETURN SPRING
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
Re: Small Safety Prime stopped working
celem wrote:Knowing that lee has an excellent warranty service I sent an email to see if they would replace the spring. Lee just emailed me and said they are sending me the spring for free.
FYI - the part is:
BP3376 RETURN SPRING
It only a dollar from Lee. http://leeprecision.com/return-spring.html
Je suis Charlie
-
- Founding Member
- Posts: 736
- Joined: 30 Jun 2013 09:30
- My Press Choice: Turret
- Location: Kingsland, GA
- Has thanked: 51 times
- Been thanked: 222 times
Re: Small Safety Prime stopped working
I'm so stubborn and cheap that I'm still using it as it is. Works fine.
-
- Founding Member & Supporter
- Posts: 1123
- Joined: 20 Dec 2013 11:09
- My Press Choice: Single Stage
- Location: Arizona
- Location: Arizona
- Has thanked: 688 times
- Been thanked: 327 times
Re: Small Safety Prime stopped working
They sure do!!! They replaced mine, quick, fast & in a hurry, asRanch Dog wrote:Well, Lee will replace stuff that stops working.
the guy in the movie once said.
A day late & A dollar short? Story of my life