Lee Loader

Just a little way to keep the primers from filling up under the press. Made a funneled hole from the top, then came up through the bottom a little ways also. Then put velcro on the plastic case that my auto disk riser came in. They don't fall in 100% yet, but it's an improvement.

That should serve you well. I had a similar setup to catch primers on a turret press for years.

I have the drilled hole, but a tapered hole is much better. Gotta fix that.

I opened up the hole some more, leaning on the drill taking the tapered hole farther back. Now the majority of them fall in the tube.