Value turret spent primers
-
- Posts: 15
- Joined: 04 Mar 2016 13:49
- My Press Choice: Turret
- Location: IN
- Has thanked: 4 times
- Been thanked: 14 times
Value turret spent primers
Just a little way to keep the primers from filling up under the press. Made a funneled hole from the top, then came up through the bottom a little ways also. Then put velcro on the plastic case that my auto disk riser came in. They don't fall in 100% yet, but it's an improvement.
You do not have the required permissions to view the files attached to this post.
-
- Founding Member & Supporter
- Posts: 1099
- Joined: 21 Jan 2014 20:57
- My Press Choice: Progressive
- Location: Eastern Iowa
- Has thanked: 182 times
- Been thanked: 357 times
Re: Value turret spent primers
That should serve you well. I had a similar setup to catch primers on a turret press for years.
- Old Scribe
- Supporter
- Posts: 369
- Joined: 02 May 2015 09:13
- My Press Choice: Turret
- Location: State of Jefferson
- Has thanked: 461 times
- Been thanked: 120 times
Re: Value turret spent primers
I have the drilled hole, but a tapered hole is much better. Gotta fix that.
"Well here's another nice mess you've gotten me into." Oliver Hardy
-
- Posts: 15
- Joined: 04 Mar 2016 13:49
- My Press Choice: Turret
- Location: IN
- Has thanked: 4 times
- Been thanked: 14 times
Re: Value turret spent primers
I opened up the hole some more, leaning on the drill taking the tapered hole farther back. Now the majority of them fall in the tube.