Primer Plate Sticky
Posted: 03 Feb 2017 21:36
My latest acquisition, Loader in 243 arrived. Came with 2 of the load charts, they were stuck together and a sticky priming base. The plate moves but sticks with any little movement. It seemed really sticky to the touch. Got out the brake clean and hosed it out, 3 times. The last time, very little if any brown muck came out. No longer sticky to the touch and doesn't stick or get cocked sideways as easily but still does. In another thread, I believe it was Ranch Dog that said to keep the priming plate oiled. Would you just oil this around the outside of the plate and I am assuming that very little oil should be used, would hate to have that migrate and start contaminating primers. I was thinking along the lines of light sewing machine oil or light 3 in 1.
I was looking through the parts on Lee Precision and noticed that the priming bases are bare, no seating stem. I am assuming that the seating stems are threaded like the pistol seaters. The area around the seating stem on this 243 has some hard gunk stuck to it. Maybe a previous owner used something for a thread lock. Maybe that something found its way into the spring area of the priming chamber. The rest of the kit looks clean.
The charge tables are dated 1977, there is no date on the instructions. The instructions do list 110 Lee Loader kits though. I believe that this is the newest one in the old style that I have seen. Still has the cubic inch powder scoop, the 167 IIRC.
I was looking through the parts on Lee Precision and noticed that the priming bases are bare, no seating stem. I am assuming that the seating stems are threaded like the pistol seaters. The area around the seating stem on this 243 has some hard gunk stuck to it. Maybe a previous owner used something for a thread lock. Maybe that something found its way into the spring area of the priming chamber. The rest of the kit looks clean.
The charge tables are dated 1977, there is no date on the instructions. The instructions do list 110 Lee Loader kits though. I believe that this is the newest one in the old style that I have seen. Still has the cubic inch powder scoop, the 167 IIRC.