Do you wear a respirator?
- JohnnyEnfield
- Supporter
- Posts: 159
- Joined: 08 Dec 2017 20:24
- My Press Choice: Single Stage
- Location: Northeast USA
- Has thanked: 176 times
- Been thanked: 53 times
Do you wear a respirator?
Hello all,
I am gearing up for casting and I am wondering if any or most of you use a respirator when you cast. As I prepare to make ingots from scrap, I remember my first session when i had no respirator and the fumes were pretty nasty. So, I am planning on buying a respirator and the correct cartridges after payday. I am wondering what you guys do. Thanks for your input. Please chime in.
Stay Safe,
Johnny
I am gearing up for casting and I am wondering if any or most of you use a respirator when you cast. As I prepare to make ingots from scrap, I remember my first session when i had no respirator and the fumes were pretty nasty. So, I am planning on buying a respirator and the correct cartridges after payday. I am wondering what you guys do. Thanks for your input. Please chime in.
Stay Safe,
Johnny
Reduce, reuse, recycle, means- resize, reload, recycle.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Do you wear a respirator?
I don't. I cast under a carport on my barn and set up as the breeze dictates. Thatis also why I flux with cedar shavings. If I'm smelling the cedar, something is wrong, so I adjust. That plus the smoke the shavings produce.
Michael
- Old Scribe
- Supporter
- Posts: 369
- Joined: 02 May 2015 09:13
- My Press Choice: Turret
- Location: State of Jefferson
- Has thanked: 461 times
- Been thanked: 120 times
Re: Do you wear a respirator?
I cast in the garage with the entry door open, the walk through door open. Both doors oppose each other and a small desk fan nearby moving the air away.
I also flux with cedar saw dust or juniper saw dust. No need for a respirator IMHO.
I also flux with cedar saw dust or juniper saw dust. No need for a respirator IMHO.
"Well here's another nice mess you've gotten me into." Oliver Hardy
-
- Posts: 221
- Joined: 17 Mar 2014 10:13
- My Press Choice: Single Stage
- Location: N AL
- Has thanked: 12 times
- Been thanked: 76 times
Re: Do you wear a respirator?
Nope. If you are concerned, before you start, see your Doc. Have blood drawn and lead levels checked. Don't let them spook you. Kid levels are ~<5. Adult is ~~<11. Mine has been 6-7 over past 6 years (and I just figured out that is PROBABLY more related to a 24% lead crystal decanter I use for my bourbon than it is casting/shooting lead!) Will give you a baseline #. Then have it checked at 6 mo. If it spikes, you need to look at your procedures. Then (as I do) get it checked for annual physical.
- GRV01
- Posts: 92
- Joined: 21 Mar 2017 02:14
- My Press Choice: Hand Press
- Location: Miami FL
- Has thanked: 6 times
- Been thanked: 24 times
Re: Do you wear a respirator?
Great advice. Didnt even realize that could be doneoscarflytyer wrote:Nope. If you are concerned, before you start, see your Doc. Have blood drawn and lead levels checked. Don't let them spook you. Kid levels are ~<5. Adult is ~~<11. Mine has been 6-7 over past 6 years (and I just figured out that is PROBABLY more related to a 24% lead crystal decanter I use for my bourbon than it is casting/shooting lead!) Will give you a baseline #. Then have it checked at 6 mo. If it spikes, you need to look at your procedures. Then (as I do) get it checked for annual physical.
No thin chicks
Currently reloading .357 Magnum and .38 Special
Currently reloading .357 Magnum and .38 Special
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Do you wear a respirator?
I do mine with my blood work for the other meds I use. Just ask your doctor to include the "lead panel". Mine comes back at the absolute bottom.GRV01 wrote:Great advice. Didnt even realize that could be doneoscarflytyer wrote:Nope. If you are concerned, before you start, see your Doc. Have blood drawn and lead levels checked. Don't let them spook you. Kid levels are ~<5. Adult is ~~<11. Mine has been 6-7 over past 6 years (and I just figured out that is PROBABLY more related to a 24% lead crystal decanter I use for my bourbon than it is casting/shooting lead!) Will give you a baseline #. Then have it checked at 6 mo. If it spikes, you need to look at your procedures. Then (as I do) get it checked for annual physical.
Michael
-
- Founding Member & Supporter
- Posts: 674
- Joined: 30 Jun 2013 09:30
- My Press Choice: Turret
- Location: S. Oregun
- Has thanked: 203 times
- Been thanked: 371 times
Re: Do you wear a respirator?
I don't. I cast indoors in my small shop 12'x18'inside. I open one window and crack the door. I use a 6" fan to blow the smoke out the door. I have been doing my casting like this for quite a while and my annual blood tests, a requirement from my employer and done every year since retirement, usually show lead levels under 7 or 8. The only "problem" when home casting is the smoke, not lead vapors as for lead to vaporize it must be much hotter than home casting pots can produce (1,000 degrees?).
If you want to, fine, go ahead. I have been casting for only 20+ years and I'm sure there are fellers here that have been casting much longer, but I have not met anyone with elevated lead levels from casting bullets or sinkers, and the only person I knew with high heavy metal levels was a welder that often welded on School Bus Yellow painted parts. (I read about a guy the cast bullets every day, for income, and after 20 years reportedly had high lead levels).
If you want to, fine, go ahead. I have been casting for only 20+ years and I'm sure there are fellers here that have been casting much longer, but I have not met anyone with elevated lead levels from casting bullets or sinkers, and the only person I knew with high heavy metal levels was a welder that often welded on School Bus Yellow painted parts. (I read about a guy the cast bullets every day, for income, and after 20 years reportedly had high lead levels).
- Macd
- Supporter
- Posts: 1009
- Joined: 16 Oct 2017 16:12
- My Press Choice: Single Stage
- Location: Far East
- Has thanked: 362 times
- Been thanked: 403 times
Re: Do you wear a respirator?
Taking normal precautions like ensuring adequate ventilation, keeping melt temperatures within parameters, using safe fluxes and avoiding hovering over the pot is my routine. Dispose of dross (skimmings) safely and avoid the dust they leave. This is primarily lead oxide and is particularly toxic. I melt wheel weights outside and stay downwind as these also contain arsenic and antimony. I use gloves and a dust mask when I sort the weights as they are generally covered in dust and dirt. My indoor casting station is enclosed and fan ventilated to the outside. Hygiene is important so washing hands avoiding contamination of food and drink is a must.
-
- Posts: 221
- Joined: 17 Mar 2014 10:13
- My Press Choice: Single Stage
- Location: N AL
- Has thanked: 12 times
- Been thanked: 76 times
Re: Do you wear a respirator?
As RD said, request the lead panel. Also make sure they get the odd blue colored tube top for lead (there are 3 diff close colors!)! And expect a few odd looks/questions. If you don't want to be bothered to explain why, just say you handle lead at work!
- RBHarter
- Founding Member
- Posts: 2047
- Joined: 13 Mar 2014 19:45
- My Press Choice: Single Stage
- Location: The green hell 90 miles north of Texarka
- Has thanked: 76 times
- Been thanked: 672 times
Re: Do you wear a respirator?
My level got pretty high .......12 I think .
I was layed off for about 5 months 2yr back to back I dropped to a 6 and doubled the amount of casting , loading and shooting I was doing . Turns out my levels were caused by all of lead based oxidized OD green paint I was in 3 hr a day contact with 4 days a week . Took away the OD green paint lead levels dropped .
If you're getting the lead hot enough to vaporize or fume it's WAY TOO hot to cast .
I was layed off for about 5 months 2yr back to back I dropped to a 6 and doubled the amount of casting , loading and shooting I was doing . Turns out my levels were caused by all of lead based oxidized OD green paint I was in 3 hr a day contact with 4 days a week . Took away the OD green paint lead levels dropped .
If you're getting the lead hot enough to vaporize or fume it's WAY TOO hot to cast .
Just a Red neck,White boy, Blue blood American.....