I've got some shooting to do but after working in the heat all morning, I just can't do it. Instead, I've been powdering through my reloading room getting things ready for resale and organizing what is going to stay. I started a project a year & a half ago, where I purchased custom Ez-X-Expanders, for all my bottle-necked cartridges. In a nutshell, I stopped flaring case necks with this type of cartridge for oversized cast bullets or tight fitted jacketed bullets and instead use an expander that fits the bullet I'm using.
It has been a bit of a mess, keeping them in a "roll" of fabric, pulling them as I replace them.
Funny thing is that in the 18 months since I started this, hard to believe that the time has since ordering/receiving has been that long, I've stopped shooting cast in my most of my 30 calibers. Now, I only use cast with my 30-30 Wins and 7.62x39s. I do favor Speer jacketed bullets and have found brass sized with the standard Lee expander tough to balance a bullet on the case mouth. The +.001" expanders solve that.
Ez-X-Expanders Part II
50 BMG, Collet, and steel reloading dies plus the Factory Crimp Dies. Also, discussions concerning the Deluxe, Pacesetter, and RGB die sets.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Jump to
- The Basics
- ↳ Registration, Rules, and Information
- ↳ Member Introductions
- ↳ Topic Bucket
- ↳ Question Of The Month
- ↳ Lee Custom Engineering & Lee Precision Memorabilia
- The Bench
- ↳ Lee Loader® & Reloading Presses
- ↳ APP
- ↳ Lee Loader®
- ↳ Hand Presses
- ↳ Shotgun
- ↳ Single Stage
- ↳ Progressive
- ↳ Turret
- ↳ Press Accessories & Parts
- ↳ Reloading Dies
- ↳ Handgun
- ↳ Rifle
- ↳ Utility
- ↳ Powder Handling
- ↳ "Dippers"
- ↳ Automatic Powder Measures
- ↳ Bench/Stand Mounted Powder Measures
- ↳ Safety Powder Scale
- ↳ All Other Powder Handling Tools
- ↳ Priming and Case Conditioning Tools
- ↳ Off Press Priming
- ↳ On Press Priming
- ↳ Case Trimming
- ↳ All Other Tools
- ↳ Bullet Casting
- ↳ Melters & Furnaces
- ↳ Bullets, Buckshot, & Slugs
- ↳ Bullet Sizing
- ↳ Bullet Lube and Powder Coating
- ↳ Accessories and Other Tools
- ↳ Show Us Your Bench!
- The Ammo
- ↳ Loading Data
- ↳ Lee Modern Reloading Book
- ↳ Other Reloading Data
- ↳ Generated Reloading Data
- ↳ Record Keeping
- ↳ Lee Shooter
- ↳ Other Load Record Keeping Sytems
- ↳ Cast Bullets, Buckshot, & Slugs
- ↳ Handgun Reloading
- ↳ Rifle Reloading
- ↳ Shotgun Reloading
- The Firing Line
- ↳ Field/Hunting Stories
- ↳ The Shooting Range
- ↳ Handgun Discussions
- ↳ Muzzleloader Discussions
- ↳ Rifle Discussions
- ↳ Shotgun Discussions
- The Support
- ↳ DIY Projects & Tips
- ↳ 3D Printing Projects
- ↳ Product Ideas
- ↳ Lee Precision website
- ↳ Lee Precision Online Catalog
- ↳ Lee Precision Online FAQs
- ↳ Lee Precision YouTube Channel
- ↳ Lee Precision Customer Service Experiences
- ↳ Lee Precision Dealers
- ↳ Innovative Products For Your Lee Equipment
- Buy, Sell, Trade, or Pay It Forward - Member to Member Transactions
- ↳ Lee Precision Reloading Equipment
- ↳ Bullet Molds and Casting Equipment & Tools
- ↳ Other Reloading Equipment
- ↳ All Other Items