Bullet Seating Die Adjustment When Using FCD?
- GasGuzzler
- Moderator & Supporter
- Posts: 2045
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 330 times
- Been thanked: 501 times
Re: Bullet Seating Die Adjustment When Using FCD?
I just do it over and over until it looks right. Wastes time and components. Oh well.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.
-
- Supporter
- Posts: 1003
- Joined: 09 Nov 2015 06:35
- My Press Choice: Single Stage
- Location: Washington State
- Has thanked: 38 times
- Been thanked: 274 times
Re: Bullet Seating Die Adjustment When Using FCD?
[quote="RBHarter"]To take the KISS method to an alternative direction .
Grab a factory round .
I have measured three different brands of 230gr ball ammo. All measured .469 at the case mouth. I measure using a set of calipers (I have three different brands) with the bottom half of the "jaws". I cannot get that much crimp on my reloads, nor do I want to. My goal is .004 at the case mouth under finished round size. My experience,which is limited for the 45acp, say's it does make a difference with my loads as far as ES and SD over my chronograph. Perhaps with the old standby of 4.5gr of Bullseye under a 200gr lead bullet maybe not so much, no idea, I don't shoot those. I'm not saying this it the "best" way, or the "right" way, it's information I found searching this very question of "proper crimp" and it works for me. Just passing along maybe some useful information to someone who's looking. As in all things re-loading, YMMV.
Grab a factory round .
I have measured three different brands of 230gr ball ammo. All measured .469 at the case mouth. I measure using a set of calipers (I have three different brands) with the bottom half of the "jaws". I cannot get that much crimp on my reloads, nor do I want to. My goal is .004 at the case mouth under finished round size. My experience,which is limited for the 45acp, say's it does make a difference with my loads as far as ES and SD over my chronograph. Perhaps with the old standby of 4.5gr of Bullseye under a 200gr lead bullet maybe not so much, no idea, I don't shoot those. I'm not saying this it the "best" way, or the "right" way, it's information I found searching this very question of "proper crimp" and it works for me. Just passing along maybe some useful information to someone who's looking. As in all things re-loading, YMMV.