New 2023 Inline Bullet Feeder
- Cdog
- Posts: 7
- Joined: 10 Oct 2020 01:21
- My Press Choice: Turret
- Location: N W Ga. U S A
- Has thanked: 5 times
- Been thanked: 4 times
New 2023 Inline Bullet Feeder
I've used Lee progressive presses of and on for more than 20 years.
I don't even try to get the current type bullet feed to work, especially with a hollow base bullet. I place them by hand.
I received Dennis's monthly news letter yesterday and it was introducing a new inline die type bullet feeding design. I'd sure like to get some details from anyone here that has an inside scoop or gets to actually use one.
https://www.titanreloading.com/product- ... llet-feed/
Thanks Cdog
I don't even try to get the current type bullet feed to work, especially with a hollow base bullet. I place them by hand.
I received Dennis's monthly news letter yesterday and it was introducing a new inline die type bullet feeding design. I'd sure like to get some details from anyone here that has an inside scoop or gets to actually use one.
https://www.titanreloading.com/product- ... llet-feed/
Thanks Cdog
CDOG
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: New 2023 Inline Bullet Feeder
Thanks for the heads up. I received Titan's newsletter but hadn't read it yet. I signed up for the 30, 35, and 45 feeders and have cranked out a round in a couple of years.
Michael
- Fyodor
- Founding Member & Supporter
- Posts: 1514
- Joined: 04 Jan 2014 05:45
- My Press Choice: Progressive
- Location: Gernsbach, Germany
- Has thanked: 794 times
- Been thanked: 504 times
Re: New 2023 Inline Bullet Feeder
If only my presses had more stations... but I will get away with my pro1000s. They work fine. Even with hand placed bullets.
"I disapprove of what you say, but I will defend to the death your right to say it"
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
-
- Posts: 10
- Joined: 24 Jun 2016 20:41
- My Press Choice: Turret
- Location: TN
- Has thanked: 2 times
- Been thanked: 7 times
Re: New 2023 Inline Bullet Feeder
I put one of the new inline feeders on my classic turret. It was an easy setup and has worked smoothly for the 300 or so rounds of 357 Mag that I used it for. I'm happy with it.
-
- Posts: 27
- Joined: 19 Feb 2020 21:14
- My Press Choice: Turret
- Location: Fl
- Has thanked: 6 times
- Been thanked: 6 times
Re: New 2023 Inline Bullet Feeder
Clutch, could you post a photo of your setup, considering a similar setup.
- GasGuzzler
- Moderator & Supporter
- Posts: 2045
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 330 times
- Been thanked: 501 times
Re: New 2023 Inline Bullet Feeder
Yes, please. I haven't built any ammo aside from some test rounds (I haven't tested) for my dad's inherited .222 REM Savage 340 in a long time but I would be interested in the two that would feed 9mm and .45 ... and maybe the one for 5.56. I too have a 4-hole Lee turret.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.
-
- Posts: 10
- Joined: 24 Jun 2016 20:41
- My Press Choice: Turret
- Location: TN
- Has thanked: 2 times
- Been thanked: 7 times
Re: New 2023 Inline Bullet Feeder
Here are some photos.
The press is set up for 357 Magnum with Lee dies.
The decapping/resizing die is missing because I do that before tumbling and also prime off press. So, the 1st station is case expanding and powder drop followed by the in-line bullet feeder, bullet seater and factory crimp.
Hope this helps.
The press is set up for 357 Magnum with Lee dies.
The decapping/resizing die is missing because I do that before tumbling and also prime off press. So, the 1st station is case expanding and powder drop followed by the in-line bullet feeder, bullet seater and factory crimp.
Hope this helps.
You do not have the required permissions to view the files attached to this post.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
- GasGuzzler
- Moderator & Supporter
- Posts: 2045
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 330 times
- Been thanked: 501 times
Re: New 2023 Inline Bullet Feeder
That's how I'd do it too.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.