Page 3 of 3
Re: Replaced the clutch on my Six /Pack Pro, didn't help
Posted: 29 Jan 2024 11:06
by horseman
Royce wrote: ↑29 Jan 2024 10:39
Customer service is on the case. Will let everyone know how it turns out.
Lee will take care of you, they have good customer service.
Re: Replaced the clutch on my Six /Pack Pro, didn't help
Posted: 31 Jan 2024 22:04
by Royce
horseman wrote: ↑29 Jan 2024 11:06
Royce wrote: ↑29 Jan 2024 10:39
Customer service is on the case. Will let everyone know how it turns out.
Lee will take care of you, they have good customer service.
I did not hear from them today. Hopefully I will tomorrow. Still working on this problem.
Re: Replaced the clutch on my Six /Pack Pro, didn't help
Posted: 05 Feb 2024 20:36
by Royce
Friday afternoon the CS rep at Lee suggested I remove the shell plate holder and inspect for stuff underneath. I did that and it looks clean under there. I submitted a video of the problem Saturday but no word yet.
Re: Replaced the clutch on my Six /Pack Pro, didn't help
Posted: 06 Feb 2024 14:13
by Royce
I guess he is off Mondays. This morning he watched my video and suggested that I remove the shellplate and inspect the two countersunk screws underneath to see if they were loose and rubbing. It turns out they were! I tightened the two screws and reassembled everything. It works perfectly now!!!!
Re: Replaced the clutch on my Six /Pack Pro, didn't help
Posted: 06 Feb 2024 18:20
by Bill Moore
That's good news!
Re: Replaced the clutch on my Six /Pack Pro, didn't help
Posted: 07 Feb 2024 06:03
by BrianT
That's great! I watched a video online from what appears to be a Lee Distributor, where he loosens those and turns the carrier if the primer tray isn't getting shook enough.