The Wife and I went to the range for the 4th of July celebrations. Gorgeous day no clouds and only in the mid 70s. The only problem was it was crowded but that worked out as the guy next to me was shooting a 300 Win Mag and I got to score 9 pieces of brass, he didn't reload but did complain about the price of ammo. Told him I reloaded and would put them to good use.
Now for the load testing for my .380 and 45 acp. Loaded 5 each at 2.4 gr of TG through 2.8 gr for the 380. The 2.4 load had one stove pipe as did the 2.7 gr load ?!? The 2.4, 2.5 and 2.6 all ruined the case rim, again not sure why but think the extractor may be at fault. The 2.7 and 2.8 were pretty stout and not what I was wanting. The 380 is a Cobra CA 380 and being 100 bucks new is well cheaply done and after about 75 rounds is looking quit worn in the inside. Guess it's time to buy a better 380, lol.
My Hi-Point on the other hand worked flawless. Made load of BE from 3.9 down to 3.5 my target load. Starting with the 3.9 and working down, what can I say but every load work great and accurate too unlike the .380 that was all over the paper.
Range day and load testing.
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
-
- Founding Member & Supporter
- Posts: 1099
- Joined: 21 Jan 2014 20:57
- My Press Choice: Progressive
- Location: Eastern Iowa
- Has thanked: 182 times
- Been thanked: 357 times
Re: Range day and load testing.
Sounds like a good day to me. It would take away some of the fun if finding that magic load for every gun was easy.
- akuser47
- Moderator & Supporter
- Posts: 1397
- Joined: 30 Jun 2013 09:16
- My Press Choice: Single Stage
- Location: ohio
- Has thanked: 666 times
- Been thanked: 266 times
Re: Range day and load testing.
Sounds like a great day. Also be careful with those cheaper pistols Ive had two raven p25 one was fine the other had issue chambering and ejecting I had found a crack in the frame that was flexing causeing the slide to bind up.
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
Re: Range day and load testing.
I'm thinking the extractor is bent. The stamped sheet metal for the trigger was all bent and deformed after about 75 rounds so maybe the extractor is too. Hard to say till I get it out and to do that I need smaller punches.
Je suis Charlie